LS Busduct Advantage
Easy Distribution of Loads
LS Busduct is separated from a single line at a plug box, which simplifies the power system. A MCCB or other fusible device can be installed at the plug box to effectively shut off fault current.
Easy Maintenance
The design of the LS Busduct system makes it easy to detect abnormalities during installations, ensuring easy maintenance. When humidity or dust causes a malfunction in the system, the easy-to-maintain design allows replacing only the damaged parts.
Easy Installation
LS Busduct is easy to install, using a simple method to connect, and improves cost due to its compact size. LS Busduct also incorporates the “one joint bolt type” with a torque of only 1200kg.cm to further minimize time and costs.
Easy Adaptability
LS Busduct can be adapted to almost any application configuration. Various fittings, such as elbow, off-set and tee can be applied to various complex routes make Busduct as versatile as traditional cable, able to transmit high-capacity currents without electrical and mechanical loss.
LS Cable & System Busduct Product Line-up
The LS Cable & System Busducts are available in a wide range of products from low current capacity LT-way (25A~63A) to large current capacity (630A~6000A), and the products enable the supply of proper capacity of power for factories and the distribution system. Our products such as the air insulated bus conducts with enhanced safety property and the cast resin Busducts with resistance for high temperature, humidity and dusty environment will satisfy various application needs and provide a customized engineering service.
EX-way (UL)
LS Cable & System E-series Busduct can be used for applications carrying up to AC 1000V and currents from 630A to 6000A. When used in conjunction with a joint kit, the large connected surface minimizes contact resistance to realize NEMA 3 weather resistance. LS Busduct can be configured with interior or exterior NEMA 3R housing and interior NEMA 1, according to application requirements.
- Sandwich Type (Epoxy Coating)/AL Extrusion Housing/Standard IP54/Joint Kit
- Designed for low voltage products below AC 600V, and between 630A to 6000A.
- The most widely used conventional model.
Applications
- Electrical rooms
- Apartments & large buildings
- Plants
EX-way (UL) Series
Ex-way (UL) is a totally-enclosed, non-ventilated, true-sandwich design rated at 600V and manufactured to carry a current between 630A and 6000A. Ex-way (UL) is available with either copper or aluminum conductor. The all-aluminum, two-piece housing provides excellent mechanical strength and heat diffusion properties.
Benefits
- Lightweight, easy to install and compact
- High thermo-diffusional efficiency
- Compatible with temperature- and power-monitoring systems and plug-in boxes
- Earthquake- and explosion-resistance features
Mini-way
Air Insulated Type/AL Extrusion Housing/Standard IP54/Joint Kit
- Designed for low voltage products below AC 1000V, and between 160A and 800A.
- Ideal for small distribution system with multi distribution loads (Vertical areas of buildings, data centers, assemble factories)
LT-way
Flat Wire Type/Copper Conductor with PVC Extruded Insulation/AL Extrusion Housing/Various Plug Types/Joint Brush (It can be installed with a live wire.)
- Designed for low voltage products below AC 690V, and between 25A and 63A
- Suitable for Light bulbs, FFU and distribution for small equipments
MS/Wind-way
Air Insulated Type/ Compact NSPB Type / One-Bolting Type Designed for low voltage products below AC 1000V, and between 1000A and 5000A
- A Hybrid incorporating NSPB and sandwich type
- Ideal for ships, wind towers and chemical plants where stability is required
NSPB MV
LS Cable & System NSPB Busduct provides a wide range of options, including conductors, material and housing design with a wide range of voltage under 27kV and current between 800A and 4000A. NSPB can be customized to satisfy the needs of every client and every project.
- Air Insulated Type/Insulated conductors separated by phase/AL, STS and Steel Housing (optional)/Indoor Type/Outdoor Type
- NSPB-LV : Designed for low voltage products below AC 1000V,and below 4000A
- NSPB-MV: Designed for high voltage products below AC 27kV, and below 4000A - Suitable for plants where high stability is required.
Benefits
- Environmentally friendly while retaining excellent performance
- RoHS certified; free of hazardous substances
- High short-circuit strength
- Designed in accordance with IEC and IEEE standards
Applications:
- Large buildings with high-capacity requirements
- Plants
- MV electrical substations
CR-way
LS Cable & System offers CR-way Busduct for when you need total protection from the elements. CR-way's epoxy resin housing fully encloses the product, offering additional insulation and protection. CR-way is available up to 27kV and is rated IP68. It is suitable for current capacities between 630A to 7500A (high voltage product 120~5000A). Choose from either copper or aluminum conductor, and tin- or sliver-plated connections.
CR-LV/MV
- Cast Resin Type/IP 68/Epoxy Molding between Conductors
- CR-LV: Designed for low voltage products below AC 1000V, and between 630A and 6300A. - CR-MV: Designed for high voltage products below AC 27KV, and below 5000A.
- The most safe bus duct suitable for plants where high stability is required.
CR-LV-II
- Cast Resin Type/IP 68/Epoxy Molding between Conductors and Housing
- AL Housing(Steel and SUS as optional)/Indoor/Outdoor
- Designed for low voltage products below AC 1000V, and between 630A and 6300A.
- Suitable for area with high humidity or rapidly changing temperature
- Easily jointed with Sandwich type Busduct
Benefits
- Completely enclosed by a strong epoxy resin for maximum protection, stability
and durability
- Safe for use near inflammable steam and gas, dusty environments, and other potentially explosive hazards
- Certified IP68, which means the product offers exceptional protection from intrusive water, fine particulates, erosion and corrosion
- Designed to prevent flames from spreading and includes fire-resistance efficiency as a standard feature
- RoHS Certified; free of hazardous substances
Applications
- Humid or dusty locations
- Chemical plants
- Outdoor installations
- Large capacity power needs
MCCB / Fuse Box
LS Busduct is easy to use with a variety of plug-in units. MCCB, a circuit breaker and trip device, can be used in conjunction with LS Busduct to manually open and close the electric circuit in case of overload.
- Plug In Unit: 100A - 600A
- Tap-off unit: 800A - 1200A
FUSE is a device in which a circuit breaker is assembled by fuse link, holder carrier and base, which can manually or electrically open and close the electric circuit. Use FUSE with LS Busduct to easily maintain a current branch, even when the load is extended and shifted.
Benefits
- Compatible with multiple brands and across a variety of applications
- Offers added protection to wires while distributing loads
- Can automatically cut off electric power in case of overload and short circuit
- A variety of rated currents from small to large capacities (30AF~1200AF)
Want to see more?